登入 註冊廠商專區進駐申請廣告刊登完成訂購詢價

景興電腦科技有限公司--紅外線熱像儀系列(NEC F30)、影像工業內視

名錄、商品

採購指南

廠商指南

廠商名錄

上網廠商

廠商動態

特惠商品

最新商品

最新廠商

熱賣商品

最新名錄

點閱排行

活動訊息

線上詢價

一起討論區

化工字典

儀器百科

耗材百科

基因科學

管柱分析

產業動態

樂活養生

中醫藥典

疾病醫霸

展覽訊息

時事報導

企業焦點

廠牌故事

話題廠商

話題商品

Tw17!服務

廣告申請

本日優惠

廠商申請

企業網站

儀器採購指南申請

台灣儀器網優惠訊息
歡迎光臨建成科學儀器專業網

大台北尖端儀器有限公司

產品詳細資料
GS / GSD橡膠 / 塑膠 硬度計 素材型號選定

人氣指數

6583
GS / GSD
橡膠 / 塑膠 硬度計 素材型號選定
DUROMETER MODEL CHOSE
廠牌:代理
供應商:大台北尖端儀器有限公司
定價:與我們聯絡
產品規格及特色
中文說明
SPEC.

  

 

 

Making measurement of various stiffness possible
Durometer (rubber / plastic hardness measurement)

・When the base of durometer and work are cohered each other, added pressure caused by spring inside durometer indentation changes shape of work and work makes power against this power.
・Pressed volume of pressed indentation are indicated as stiffness when this added pressure and opposition power are in equivalent.
・The reason why there are various kinds of durometer, it is for the purpose of measuring spongy thing like sponge and hard thing like plastic by combining spring power of strong and weak and shape of pressed indentation (sharp pointed or round).

        

Measurement example
The basis of measurement of hardness with durometer is that pressed plate ( indentation plate ) of durometer held with both hands is vertically pressed from the top in a fixed velocity on the flat plate of tested material set on a flat table and immediately after that, indicated maximum figure is read. That figure shows “hardness”.
Basic condition for measurement as standard is ruled in common with as below.
1.As to measuring position, it is to be inside from the edge of tested material by 12mm and above. The distance is to be away by 6mm and above.
2.Thickness of tested material is normally 6mm and above . Type E is 10mm and above.
3.Hardness is to be the middle of 5 points or its average.
4.In case measured result is 50°by Type A, “A50” is indicated.
5.Test condition : temperature 23+- 2 humidity 50 +-5%.

■Selection of model of durometer
There are different various types for durometer regarding spring power, dimension and shape of osibari. This is according to each country’s standard for the purpose of indicating degree of hardness and softness with higher sensitivity against characteristic of test material of different surface.
TECLOCK durometer is in accordance with each country’s standard and has completed line-up suiting to wide range of materials including original products. Each durometer such as Type A. D. E. in accordance with physical test method of “ vulcanization rubber and heat plasticity rubber “ JIS K6253 (new JIS ) ruled for the purpose of ISO.
Please refer to the right chart and select the most suitable model.

 

 

G is available for (tisin) night line type of end letter N
Only (tisin) night line type is available for type of end letter G

Regarding night line type (end of model code G)
There are some of which maximum figure is difficult to read owing to decrease of indicated figure due to release of stress among rubber and among rubber and elastomer just after pressed plate of durometer is stuck.
As night line maintains max figure even though indicated pointer continues to indicate decreasing figure, reading accuracy is improved. Then, in case indentation is not directly seen owing to some obstacles even though measurement is possible, the figure can be confirmed by night line after measurement. as highest and lowest limiter is equipped as standard for night line type, it is effective for judging tolerance of stiffness.
 
NOTES.
同類商品 >>
GYZJ934-1/ GYZJ 935 / 936 巴可式硬度計 GYZJ 934-1 / GYZJ 935 /936 Barcol Hardness Tester GYZJ 934-1 / GYZJ 935 / GYZJ936
HPS series 橡膠硬度計 / HPS 系列 Shore Durometer HPSA ,HPSD , HPSO, HPSB,HPSC,HPSDO
ZSH 2090 鉛筆式表面硬度計 Pencil Scratch hardness Tester
GS-701N GS-701N 軟質橡膠硬度計 SOFT RUBBER HARDNESS TESTER. GS-701N
FR-1eA / FR-1eAL 洛氏硬度計 FR-1eA / FR-1eAL Rockwell Analogue Hardness Tester
AB-1000 鉛筆式硬度計 / 荷重可調型 AB-1000 Pencil Hardness Scratch Tester AB-1000
GS-719N / 720N / 721N GS-719N / 720N / 721N 橡膠塑膠硬度計 RUBBER & PLASTIC HARDNESS TESTER. GS-719N
GS-702N / GS-709N GS-702N / GS-709N 塑膠硬度計 PLASTIC HARDNESS TESTER. GS-702N / GS-709N
B, B-75, BB-75 韋伯斯特硬度計 B / B-75 / BB-75 Webster Hardness Tester B , B-75 , BB-75
306L/307L 橡膠硬度計 306L / 307L Durometer 306 / 307L
HP Series 紗錠硬度計 (筒仔紗) Yarn Package Hardness Tester
GS / GSD 橡膠 / 塑膠 硬度計 素材型號選定 DUROMETER MODEL CHOSE
GS-720H 深孔型/長腳型橡膠塑膠硬度計 RUBBER & PLASTIC HARDNESS TESTER
043019-A/B/C/D/E 粉體錠劑硬度計 Grain Rigidity Tester
600A / 600MA / 600MA/S 洛氏硬度計 600A / 600MA / 600MAS Rockwell Analogue Hardness Tester
 
 
 
GS / GSD、橡膠 / 塑膠 硬度計 素材型號選定、大台北尖端儀器有限公司、代理相關的討論主題↓
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88

回產品主分類完成訂購詢價

Bookmark and Share






台灣儀器網專為儀器開闢網路商機--儀器採購指南
KUBOTA離心機漲價說明
2019.11.07~11.11 9:30-17:00 2019台中自動化機械暨智慧製造展臺中國際展覽館(烏日區中山路3段1號),本公司於度量衡專區攤位559展出,歡迎各界先進蒞臨參觀指教!謝謝
Molecular Analysis 產品印度代理商
《恆奕企業》640頁完整版中英文綜合目錄備索,歡迎來電來訊洽詢!
Whatman濾紙;Whatman定性濾紙;美國知名大廠;Whatman代理;濾膜;濾紙;過濾頭;歡迎洽詢

>>更多

氧指數燃燒性試驗機 ASTM-D2863 / ISO-4589-2
UL94 塑膠燃燒性試驗機 ASTM-D635,ISO-1210
NBS 煙霧密度試驗機 ISO5659-2, ASTM E648
NEXGEN座墊試驗裝置FAR Part 25 App F Part II, AITM 2.009
FAA 4C 燃燒性試驗機
大型熱釋放檢測系統 ISO 9705, IMO FTPC PART 10
可燃性試驗機 EN ISO 11925-2
單一燃燒項目(SBI)測試設備 EN13823
管式爐毒性試驗設備 IEC 60754-1/2, NFX 70-100
FAA RFP(電子)火焰傳播和燃燒後時間試驗裝置
地板材熱幅射火焰傳播測試設備 EN ISO 9239-1
圓錐量熱儀 ISO 5660, ASTM E 1354

>>更多

張力計 Yokogawa T-101-02 / 05 / 10 /20 /30 /50
氧指數燃燒性試驗機 ASTM-D2863 , ISO-4589-2
1314 搖色卡機 Sampling Color Machine For Yarn
RIGO 離合 No. 419 平行板黏度計 Spread Visco Meter
514-B2表面張力測定儀 Du Nouy's Surface Tension Meter

>>更多

加入儀器採購指南讓您→訂單不斷、商機 無限
台灣儀器網優惠訊息
志尚儀器股份有限公司

景興電腦科技有限公司--紅外線熱像儀系列(NEC F30)、影像工業內視

酷愛家族!www.coi.tw    
Tw17家族付款方式申請進駐廣告刊登
 Copyright © 2006-2010 tw17 All rights reserved.