登入 註冊廠商專區進駐申請廣告刊登完成訂購詢價

景興電腦科技有限公司--紅外線熱像儀系列(NEC F30)、影像工業內視

名錄、商品

採購指南

廠商指南

廠商名錄

上網廠商

廠商動態

特惠商品

最新商品

最新廠商

熱賣商品

最新名錄

點閱排行

活動訊息

線上詢價

一起討論區

化工字典

儀器百科

耗材百科

基因科學

管柱分析

產業動態

樂活養生

中醫藥典

疾病醫霸

展覽訊息

時事報導

企業焦點

廠牌故事

話題廠商

話題商品

Tw17!服務

廣告申請

本日優惠

廠商申請

企業網站

儀器採購指南申請

加入儀器採購指南讓您→訂單不斷、商機 無限
儀器採購指南--不限商品筆數任你放

大台北尖端儀器有限公司

產品詳細資料
B, B-75, BB-75韋伯斯特硬度計 B / B-75 / BB-75

人氣指數

11152
B, B-75, BB-75
韋伯斯特硬度計 B / B-75 / BB-75
Webster Hardness Tester B , B-75 , BB-75
廠牌:代理
供應商:大台北尖端儀器有限公司
定價:與我們聯絡
產品規格及特色
中文說明
一個快速、精確的硬度計, 可檢測鋁料、黃銅、一般銅料及低碳鋼, 同時可以測試其它硬度計無法檢查的形狀、輪廓, 如擠型、抽管、平板原料..等。
 
應用說明:
◎ 可辨別熱處理前、熱處理後之材料
◎ 可以搭配固定式硬度計, 相互應用支援
◎ 可分開軟料及硬料
◎ 可分辨不合規格及不適用材料
◎ 檢查適合熱處理的條件
◎ 結合實驗室固定型硬度計可百分之百快速檢驗且節省大量人工成本
◎ 可使用於不能帶進實驗室的零組件等被測物

特點:

◎ 單手即可操作執行檢驗, 攜帶容易

◎ 直徑 3/8” 鐵砧設計, 可檢測多種不同外形材料

◎ 只要將把手施以至力到底即可讀出硬度值

◎ 在一個圓盤錶上有20個刻劃, 可應用於 "合格" 與 "不合格" 之操作模式, 以及直接讀數可轉換為其他標準洛式硬度值

◎ 標準型硬度計, 被測物之厚度為 1/4 吋

◎ 可因應客戶之需求, 其被測物之厚度可達 1 吋

  • Model B 硬度計

  • 是設計涵蓋鋁合金 ASTM 1100 至 7075 全系列。在圓盤上20個刻劃指標可對應到洛式硬度E級 Rockwell E Scale 25 – 110

  • Model B-75 硬度計

  • 特點在於硬度微細的改變也有相當靈敏回應值。這樣的靈敏度非常適合於低碳鋼及硬度較高的鋁合金測試, 對於黃銅材料測試範圍從退火到全硬材料均可測試, 在圓盤指標上共分 20 個等級,可對應到 Rockwell B Scale 20 到 100

  • Model BB-75  硬度計

  • 發展源由是為了業界需求, 一種快速測試銅及硬度較軟的銅料。在硬度計圓盤指標上有20個等級, 可以對應到Rockwell E Scale 18–100

 

適用範圍 鋁板、鋁管、鋁合金、銅板、銅管、銅合金、軟鋼板、軟鋼管等皆可測試.(操作簡單)

主要用於測量鋁合金材料,也可測量銅合金材料。

主要用於測量半硬狀態或全硬狀態的銅合金,測量退火狀態的不袗等軟鋼,測量非常硬的鋁合金。

主要用於測量紫銅和退火黃銅等硬度較低的銅材料。

規格 B 型 B-75 型 BB-75 型
刻度範圍 0 - 20
測量範圍 鋁合金:24∼110 HRE 銅合金 :15∼90 HRF HRE:18∼100
鋁合金:83∼113 HRE
銅合金:60∼90 HRF
軟 鋼 :20∼100 HRB
SPEC.

 

Webster Hardness Tester

 

 

Models B, B-75, BB-75

Portable, fast, accurate hardness gauge available in several models for testing materials such as aluminum, brass, copper and mild steel. Quickly identify tempers. Tests a variety of shapes that other testers cannot check: Extrusions, Tubing and Flat Stock.

 

  • One hand operation and portability.
  • Round 3/8 inch diameter anvil permits testing a great variety of shapes.
  • Simple operation
  • Test is made by simply applying pressure to the handles until "bottom" is felt.
  • Easy-to-read dial indicator with 20 graduations converts to standard hardness scale, or can be used as "go" and "no-go" gauge.
  • Standard hardness gauge tests materials up to 1/4 inch in thickness. Increased capacities available up to 1 inch
  • Each tester is shipped in a fitted case with a spare penetrator, adjusting wrench and standard test strip

 

Features

 

The Model B Tester is designed to cover the hardness of aluminum alloys from the 1100 to the 7075 series. The 20 graduations on the Webster dial indicator covers the range between 25 and 110 on the Rockwell E Scale.

The Model B-75 Tester was developed to obtain more sensitive response to slight changes in the upper range of hardness covered by the Model B. This sensitivity is particularly useful in testing mild steel and the stronger aluminum alloys. For brass the B-75 covers the range from annealed to full-hard. This added sensitivity is accomplished by incorporating a penetrator of slightly different contour and a heavier load spring than used in the Model B. The 20 graduations on the Webster dial indicator covers the range between 20 and 100 on the Rockwell B Scale.

The Model BB-75 Tester was developed to answer the need of certain industries for a method of rapidly testing the hardness of electro-deposited copper and copper in the low hardness range. The B-75 penetrator is used to give sensitivity and the Model B load spring is employed to give light pressures. This combination allows the user to test the soft range of many common materials.

 

Operation

 

This sectional view shows the basic design principle of the Webster Hardness Tester. The different models vary only in penetrator and load spring design. These combinations give the ability to test a wide range of hardnesses and metals.

The penetrator housing, which contains the penetrator and load spring, slides vertically in the frame of the tester when pressure is applied to the handles. Only sufficient pressure is needed to "bottom" the lower face of the housing against the work. Resistance of the work to the penetrator causes the penetrator to recede into the housing against the spring pressure. The degree of penetration on the test specimen is indicated on the dial indicator sitting on top of the housing assembly. The load can be varied by adjusting the nut above the load spring, permitting the dial reading to be easily corrected against a test block of known hardness. A penetration of .010 inch produces a full scale reading on the dial indicator. Therefore materials in the softer hardness range should be of sufficient thickness so that the anvil will not influence the test and produce an "anvil effect". In general, soft materials under .025 - .030 in thickness will not give true readings.

 

Available Items

 

 

Item Number

Item

HA-5501

Model B Standard Webster Hardness Tester for use on material between 0.025" and 1/4" wall thickness. Comes equipped with a 3/8" Standard Diameter Anvil. Includes: instrument case, adjusting wrench, standard test strip, and spare penetrator. 25-110 Rockwell E Scale

HA-5503

Model B-75, As Above (Brass) 20-100 Rockwell B Scale

HA-5505

Model BB-75, As Above (Copper Low & Hard)

HA-5511

Set:B

Standard Test Strip - for everyday use in maintaining calibration of all Webster Hardness Tester models

HA-5512

Set:B-75

HA-5513

Set:BB-75

HA-5514

VSet: B

Verified Test Strip - confirmed to be within the hardness specified on the Test Strip label with a certified and traceable Bench Model Rockwell Hardness Tester. Each verified test strip is identified by a serial number and comes with a certificate, valid for one year , which testifies to the exact hardness of the test strip

 

HA-5515

VSet:B-75

HA-5516

VSet:BB-75

OPTION# Add-On:

(Option 1)

Reduced Diameter Anvil - 1/4", 3/16", or 1/8" (Note: Equip your tester with the largest diameter anvil possible for your intended job(s). This will help guard against flexing of the anvil and provide the firmest test action possible.)

Increase the jaw capacity of the tester: OPTION#, Add-On:

(Option 2)

Increase jaw capacity from 1/4" to 3/8" - add

(Option 3)

Increase jaw capacity between 1/4" and 1/2". Includes a 1" diameter spacer - add

(Option 4)

Increase jaw capacity between 3/8" and 3/4". Includes a 1-1/4" diameter spacer - add

(Option 5)

Increase jaw capacity between 1/2" and 7/8". Includes a 1", and a 1-3/4" diameter spacer - add

(Option 6)

5/8" to 1" Capacity - Increase jaw capacity between 5/8" and 1" Includes a 1", and a 1-3/4" diameter spacer - add

 

 

NOTES.
同類商品 >>
GYZJ934-1/ GYZJ 935 / 936 巴可式硬度計 GYZJ 934-1 / GYZJ 935 /936 Barcol Hardness Tester GYZJ 934-1 / GYZJ 935 / GYZJ936
HPS series 橡膠硬度計 / HPS 系列 Shore Durometer HPSA ,HPSD , HPSO, HPSB,HPSC,HPSDO
ZSH 2090 鉛筆式表面硬度計 Pencil Scratch hardness Tester
GS-701N GS-701N 軟質橡膠硬度計 SOFT RUBBER HARDNESS TESTER. GS-701N
FR-1eA / FR-1eAL 洛氏硬度計 FR-1eA / FR-1eAL Rockwell Analogue Hardness Tester
AB-1000 鉛筆式硬度計 / 荷重可調型 AB-1000 Pencil Hardness Scratch Tester AB-1000
GS-702N / GS-709N GS-702N / GS-709N 塑膠硬度計 PLASTIC HARDNESS TESTER. GS-702N / GS-709N
GS-719N / 720N / 721N GS-719N / 720N / 721N 橡膠塑膠硬度計 RUBBER & PLASTIC HARDNESS TESTER. GS-719N
B, B-75, BB-75 韋伯斯特硬度計 B / B-75 / BB-75 Webster Hardness Tester B , B-75 , BB-75
306L/307L 橡膠硬度計 306L / 307L Durometer 306 / 307L
HP Series 紗錠硬度計 (筒仔紗) Yarn Package Hardness Tester
GS / GSD 橡膠 / 塑膠 硬度計 素材型號選定 DUROMETER MODEL CHOSE
GS-720H 深孔型/長腳型橡膠塑膠硬度計 RUBBER & PLASTIC HARDNESS TESTER
043019-A/B/C/D/E 粉體錠劑硬度計 Grain Rigidity Tester
600A / 600MA / 600MA/S 洛氏硬度計 600A / 600MA / 600MAS Rockwell Analogue Hardness Tester
 
 
 
B, B-75, BB-75、韋伯斯特硬度計 B / B-75 / BB-75、大台北尖端儀器有限公司、代理相關的討論主題↓
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88

回產品主分類完成訂購詢價

Bookmark and Share






儀器採購指南--不限商品筆數任你放
OMEGA代理商;OMEGA熱電偶接頭;OMEGA熱電偶導線;熱電偶接頭;熱電偶導線;加熱帶;加熱器;壓力傳送器;
2020.Semicon.Taiwan(攤位:M0534.展期:9/23-9/25)
2020.Semicon.China(攤位:N3-3263.展期:3/18-20)
KUBOTA離心機漲價說明
2019.11.07~11.11 9:30-17:00 2019台中自動化機械暨智慧製造展臺中國際展覽館(烏日區中山路3段1號),本公司於度量衡專區攤位559展出,歡迎各界先進蒞臨參觀指教!謝謝

>>更多

EN ISO 1182 不可燃性試驗機 IMO FTPC PART 1, ASTM E 2652
NBS 煙霧試驗箱 ASTM E662, BS6401,ISO5659-2
SBI EN 13823 單材耐燃測試儀
管式爐毒性試驗設備 IEC 60754-1/2, NFX 70-100
BS 476-6 火勢蔓延試驗設備
EN ISO6940,6941.BS 5438 織品垂直燃燒試驗機
黏度計 VT-05 / VT-06
瓦楞紙板衝孔測試儀 PT-48
塑膠薄膜不透明度計 ModeL: OF10
紙張紙板短行程壓縮試驗機 SCM-1
Concora式瓦楞芯紙成形機(CMT, CCT 測試用) FT-07
環壓試驗機 CDM-5

>>更多

氧指數燃燒性試驗機 ASTM-D2863 , ISO-4589-2
破裂度機校正鋁箔 Mullen Burst Aluminum Test Foil 符合JIS標準
張力計 Yokogawa T-101-02 / 05 / 10 /20 /30 /50
紗支測長機(搖紗機) Wrap Reel ,Motor Driven
514-B2表面張力測定儀 Du Nouy's Surface Tension Meter

>>更多

加入儀器採購指南讓您→訂單不斷、商機 無限
加入儀器採購指南讓您→訂單不斷、商機 無限
加入儀器採購指南讓您→訂單不斷、商機 無限

山瑞科學有限公司

酷愛家族!www.coi.tw    
Tw17家族付款方式申請進駐廣告刊登
 Copyright © 2006-2010 tw17 All rights reserved.